Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

I have the manual for the Allis-Chalmers 5020 & 5030. The specs state that the 26 HP (5030) tractor takes 6.7 gal of trans/hydraulic fluid. My 5020 has a level plug that can be inspected to see if the level is correct. It is on the right hand side of the tractor next to the PTO lever Manual says "maintain the oil to level plug. Check every 10 hours after engine has been stopped for at least 5 minutes".

I have been doing some heavy work the last couple of days winching boulders with my FARMI logging winch and then loading the boulders into my pickup. A lot of heavy front end loader work has casued a bit more trans fluid to show up on the top of the tranmission casing. The gear shift lever seems to be leaking a bit. The rubber piece that goes around the geear shift is where it leaks. It seems like it could be attached better. Does this seem like a normal point that fluid would come out?

E-25 Hinomoto trans-hydraulic quantity
Hinomoto
Replies 7 Post by Edward C. Reilly